11 weigh stations · 3 interstates · updated October 2026
North Carolina Weigh Stations
All 11 weigh stations in North Carolina on I-40, I-85 and I-95 – location, direction and exit for every North Carolina weigh station.
Opens the map at your location – it stays in your browser.
North Carolina has 11 weigh stations in our data, on I-40, I-85 and I-95. Each North Carolina weigh station has its own page with its location, the direction of travel and the nearest exit.
11 stations serve one direction only – check the list for the side of the highway before you plan your route.
Whether a weigh station is open changes by the hour. The sign before the exit ramp shows OPEN or CLOSED, and it always has the final word.
North Carolina Weigh Station Map
Open the North Carolina weigh station mapWeigh Stations in North Carolina by Interstate
West to east or south to north, with the exit and what we know about each station.
I-404
| Weigh station | Direction | Exit |
|---|---|---|
| I-40 Eastbound Weigh Station near Bent Creek | Eastbound | Exit 47 |
| I-40 Eastbound Weigh Station near Catawba | Eastbound | Exit 144 |
| I-40 Eastbound Weigh Station near Efland | Eastbound | Exit 157 |
| I-40 Westbound Weigh Station near Efland | Westbound | Exit 157 |
I-853
| Weigh station | Direction | Exit |
|---|---|---|
| I-85 Northbound Weigh Station near Belmont | Northbound | Exit 27 |
| I-85 Southbound Weigh Station near Belmont | Southbound | Exit 27 |
| I-85 Northbound Weigh Station near Bessemer City | Northbound | Exit 10B |
I-952
| Weigh station | Direction | Exit |
|---|---|---|
| I-95 Southbound Weigh Station near Lumberton | Southbound | Exit 25 |
| I-95 Northbound Weigh Station near Lumberton | Northbound | Exit 25 |
Other highways2
| Weigh station | Direction | Exit |
|---|---|---|
| US-70 Westbound Weigh Station near Morehead City | Westbound | – |
| US-421 Southbound Weigh Station near Yadkinville | Southbound | Exit 257 |
What Happens at a North Carolina Weigh Station
When a North Carolina weigh station is open, trucks above the state’s weight threshold leave the highway and roll across the scale at low speed. A signal or a loudspeaker tells you to return to the highway or to park for a closer look. Officers can check your weight per axle, your credentials and your hours-of-service records, and they may inspect the vehicle itself.
If you’re overweight, you may get a fine and have to shift or remove part of the load before you can continue. Weighing first on a certified truck scale at a truck stop avoids most surprises.
Bypass Systems and Weigh-in-Motion
Many states pre-screen trucks at highway speed with weigh-in-motion sensors and electronic bypass programs such as PrePass or Drivewyze. Whether a particular North Carolina station takes part varies, so follow your in-cab signal and the roadside signs: when they tell you to pull in, pull in.
Federal Weight Limits
| Gross vehicle weight | 80,000 lbs |
|---|---|
| Single axle | 20,000 lbs |
| Tandem axle | 34,000 lbs |
Interstate System, 23 CFR Part 658. States may allow more with permits.
North Carolina Weigh Station FAQ
How many weigh stations are in North Carolina?
We list 11 weigh stations in North Carolina, mostly on I-40, I-85 and I-95.
Who has to stop at a weigh station in North Carolina?
Commercial vehicles above the state’s weight threshold must pull in when a station is open, unless a bypass system clears them. Private cars don’t. The posted signs at each station apply.
Are North Carolina weigh stations open 24 hours?
Some are, many aren’t – hours depend on staffing. Watch for the OPEN/CLOSED sign before each station.
Do RVs and pickups have to stop at weigh stations in North Carolina?
Privately used RVs, pickups and cars generally don’t, but rules for trailers and commercial use differ by state. The posted signs at the station always apply.
What is the weight limit at North Carolina weigh stations?
On interstates the federal limits apply: 80,000 lbs gross, 20,000 lbs on a single axle and 34,000 lbs on a tandem axle, unless a permit allows more.